2020 - nCov FACE MASKS

Wearing protective masks prevents our hands from direct contact with face and prevents germ transfer between workers. For this reason, we recommend to use them to limit the spread of the virus.

OPTION 1

PERSONNEL SAFETY

To check the offer

Please concact to your Advisor

OPTION 3 - TWO-LAYER PREMIUM MASK

OPTION 2

OPTION 1,3 - DESIGNS

1

2

4

3

EXTRA

EXTRA

EXTRA

EXTRA

5

6

8

7

EXTRA

9

10

12

11

13

14

16

15

In order for a mask to work, it is necessary to follow few simple rules:

The mask is not produced in a protective atmosphere, it is not sterile, we recommend sterilization before first use.

  1. Before applying the mask, thoroughly clean your hands with a preparation containing alcohol or wash them with water and soap.

  2. Wear the mask so that it covers the mouth, nose and chin thoroughly.

    Make sure that there are no gaps between the mask and the face.

  3. Avoid touching the mask while using it. If this happens, change the mask as soon as possible, washing your hands beforehand. The mask itself should be sterilize

    for subsequent use as described below.

  4. If mask gets wet, it needs to be replaced.

  5. Take off the mask by grasping the back straps – try not to touch the front strap, it can potentially be contaminated.

  6. After using the mask, put it into a bag, e.g. a string bag, and sterilize it at home.

There are several ways to sterilize mask:

– preheat the oven to 70 degrees and place a mask in it for 30 minutes.
– boil the mask in boiling water for 30-40 minutes
– place the mask in the water and then put it in the microwave for about 2 minutes.
– wash the mask at 60-90 degrees in washing machine and iron

Remember to wash your hands frequently with soapy water or disinfect with a soapy or alcohol disinfectant. Remember not to touch the face or the mask with your hands. Let's try to hold on 1.5 meters distance between each other at work.

By following these simple rules, you can protect yourself from being infected.

nCOViD - 19 BE PROTECTED

Privacy Preference Center

Ms - JP5 evo

Production of: Ms Printing Solution S.r.l.
Model: Evo
Technology: Thermo-Sublimation
Year: 2015
Weight: 2450 kg
Printing width: 180cm
Printing resolution: 600x600 dpi
Max. speed (double CMYK): 180 sqm/h

Description:

The condition of the machine is very good, well maintained. It’s possible to check on spot how the machine works. The machine is constantly in production. There is a possibility of immediate purchase. The exact specification can be seen here: Ms-Jp5evo or call our adviser.

* All photos and videos present the actual state of the machines.

Play Video
Tomasz Zajac

Tomasz Zajac

We are pleased to answer all questions and to counsel in choosing the right machine for your business.

+48 603 333 734